Operating the receiver for zone 2 (for STR-DN1050 only)
You can enjoy sound from the receiver in zone 2 by the following procedure.
- Turn on the amplifier in zone 2.
In the case of “Connecting the speakers in zone 2 (for STR-DN1050 only),” skip this step.
- Press ZONE POWER on the receiver.
The zone function is activated.
- Press ZONE CONTROL on the receiver.
- Select the source signals you want to output using INPUT SELECTOR on the receiver while [2. xxxx (input name)] is shown on the display panel.
- Adjust to a suitable volume.
- In the case of “Connecting the speakers in zone 2 (for STR-DN1050 only),” adjust the volume using MASTER VOLUME on the receiver while [2. xxxx (input name)] is shown on the display panel.
- In the case of “Connecting another amplifier in zone 2 (for STR-DN1050 only),” adjust the volume using the receiver in zone 2. If you set [Lineout] for [Zone2] to [Variable], you can also adjust the volume in zone 2 using MASTER VOLUME on the receiver while [2. xxxx (input name)] is shown on the display panel.
Exiting zone 2 operation
Press ZONE POWER.
Available input for zone 2 operations
- SOURCE (*1)
- BD/DVD
- GAME
- SAT/CATV
- VIDEO 1
- VIDEO 2
- SA-CD/CD
- TUNER (*2)
- USB (*3)
- Bluetooth
- Home Network (*3)
- Music Services (*3)
*1 The signals of the current input in main zone are output when [SOURCE] is selected.
*2 You can select either [FM TUNER] or [AM TUNER] from the main zone and zone 2. Priority is given to the choice which has most recently been selected, even if a different choice has already been selected in one of the zones.
*3 You can select either [USB], [Home Network], or [Music Services] from the main zone and zone 2. Priority is given to the choice which has most recently been selected, even if a different choice has already been selected in one of the zones.
Note
- When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if the receiver in zone 2 is turned on.
- AirPlay function is available in main zone only.