1. (on/standby)
2. SPEAKERS
   Press repeatedly to turn on or off the speaker system.
3. TUNING MODE, TUNING +/–
   Press to operate a tuner (FM/AM).
   Press TUNING +/– to scan a station.
4. A.F.D./2CH, MOVIE, MUSIC
5. Display panel
6. NIGHT MODE
7. INPUT MODE
8. DISPLAY
9. DIMMER
   Adjusts the brightness of the display panel in 3 levels.
10. Remote control sensor
    Receives signals from remote control.
11. PURE DIRECT
    The indicator above the button lights up when the Pure Direct function is activated.
12. MASTER VOLUME
13. INPUT SELECTOR
14. (USB) port
15. AUTO CAL MIC jack
16. PHONES jack
    Connect headphones here.

Indicator light above (on/standby) button (1)

• Green: The receiver is turned on.
• Amber: The receiver is in standby mode, and:
  • [Control for HDMI] is set to [On].
  • [Pass Through] is set to [On] (*) or [Auto].

  Indicator turns off when the receiver is in standby mode and [Control for HDMI], and [Pass Through] are set to [Off].

^* For USA, Canadian, and Australian models only