Help Guide
How to Use
Troubleshooting
List of Topics
How to Use
Troubleshooting
IC Recorder
ICD-BX132
Back
Back to Top
Troubleshooting
IC recorder operations
If you have problems
Troubleshooting
Noise
The recorded file is noisy and you want to record with less noise in your recording.
A rustling noise is recorded.
A buzzing or humming noise is recorded.
Noise is recorded when you record a file using an external microphone (not supplied).
Noise is heard when you listen to the file using headphones.
Noise is heard in the playback even though the noise cut function is active.
Power
The IC recorder cannot be turned on. The IC recorder does not operate, even if you press any button.
The IC recorder cannot be turned off.
The IC recorder cannot be turned on.
The IC recorder is powered off automatically.
The battery life is short.
There is no battery power remaining after you have left the batteries inserted for long time without using the IC recorder.
The battery life of the rechargeable batteries is short.
General operations
The IC recorder does not operate correctly.
It takes a long time for the IC recorder to start.
The IC recorder does not operate, even if you press any button.
The operation indicator does not light.
Recording
You cannot record a file.
Recording is interrupted.
You cannot add a recording or an overwrite recording.
The
VOR
function does not work.
Recording level is low.
When recording from other equipment, the input level is too strong or not strong enough.
Playback
The playback volume is low.
No sound comes from the speaker.
Sound comes from only one channel.
Sound comes from the speaker even when the headphones are plugged in.
Playback speed is too fast or too slow.
Playback sound is not good when a recorded file is played back.
Editing
You cannot divide a file.
You cannot move a file.
You cannot erase a file.
Clock
“
--:--
” is displayed.
The recording date of a file appears as “
--Y--M--D
” or “
--:--
.”
Display
There are fewer menu items displayed in the menu mode.
“ACCESS” display does not disappear.
Files
“
FULL
” is displayed and you cannot start recording.
“
FILE FULL
” is displayed and you cannot operate the IC recorder.
Messages
Messages list
Messages list
System limitations
System limitations
System limitations
Go to Page Top