1. (on/standby)
2. SPEAKERS
3. TUNING MODE, TUNING +/–
   Press TUNING MODE to operate a tuner (FM/AM).
   Press TUNING +/– to scan a station.
4. NFC sensor
5. A.F.D./2CH, MOVIE, MUSIC
6. Display panel
7. SOUND OPTIMIZER
8. CONNECTION PAIRING BLUETOOTH
   Operates the BLUETOOTH function.
9. DISPLAY
10. DIMMER
    Adjusts the brightness of the display panel in 3 levels.
11. Remote control sensor
    Receives signals from remote control.
12. PURE DIRECT
    The indicator above the button lights up when the Pure Direct function is activated.
13. MASTER VOLUME
14. INPUT SELECTOR
15. (USB) port
16. AUTO CAL MIC jack
17. PHONES jack
    Connect headphones here.

Indicator light above (on/standby) button (1)

• Green: The receiver is turned on.
• Amber: The receiver is in standby mode, and:
  • [Control for HDMI], [Network Standby] (*1), or [Bluetooth Standby] is set to [On].
  • [Pass Through] is set to [On] (*2) or [Auto].

  Indicator turns off when the receiver is in standby mode and [Control for HDMI], [Pass Through], [Network Standby] (*1), and [Bluetooth Standby] are set to [Off].

^*1 For USA and Canadian models only

^*2 For USA, Canadian, and Australian models only

Note

• The indicator flashes slowly when a software update is in progress.