POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only)

STR-DN1050:

With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.

STR-DN850:

With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 95 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.

Amplifier section

Mexican model

STR-DN1050:

Minimum RMS Output Power (*1): 95 W + 95 W (6 ohms, 20 Hz – 20 kHz, THD 0.09%)

Stereo Mode Output Power (*1): 110 W + 110 W (6 ohms, 1 kHz, THD 1%)

Surround Mode Output Power (*1)(*2): 145 W per channel (6 ohms, 1 kHz, THD 0.9%)

Other models

STR-DN1050:

Minimum RMS Output Power (*1): 100 W + 100 W (6 ohms, 20 Hz – 20 kHz, THD 0.09%)

Stereo Mode Output Power (*1): 120 W + 120 W (6 ohms, 1 kHz, THD 1%)

Surround Mode Output Power (*1)(*2): 165 W per channel (6 ohms, 1 kHz, THD 0.9%)

STR-DN850:

Minimum RMS Output Power (*1): 95 W + 95 W (6 ohms, 20 Hz – 20 kHz, THD 0.09%)

Stereo Mode Output Power (*1): 110 W + 110 W (6 ohms, 1 kHz, THD 1%)

Surround Mode Output Power (*1)(*2): 150 W per channel (6 ohms, 1 kHz, THD 0.9%)

^*1 Measured under the following conditions (Area: Power requirements):

USA and Canadian models: 120 V AC, 60 Hz

Mexican model: 127 V AC, 60 Hz

European and Australian model: 230 V AC, 50 Hz

^*2 Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field settings and the source, there may be no sound output.

Frequency response

Analog:

10 Hz – 100 kHz, +0.5/–2 dB (with sound field and equalizer bypassed)

Input

Analog:

Sensitivity: 500 mV/50 kilohms

S/N (*3): 105 dB (A, 500 mV (*4))

Digital (Coaxial):

Impedance: 75 ohms

S/N: 100 dB (A, 20 kHz LPF)

Digital (Optical):

S/N: 100 dB (A, 20 kHz LPF)

Output (Analog)

ZONE 2 (for STR-DN1050 only):

Voltage: 2 V/1 kilohm

SUBWOOFER:

Voltage: 2 V/1 kilohm

Equalizer

Gain levels:

±10 dB, 1 dB step

^*3 INPUT SHORT (with sound field and equalizer bypassed).

^*4 Weighted network, input level.

FM tuner section

Tuning range: 87.5 MHz – 108.0 MHz

Antenna (aerial): FM wire antenna (aerial)

Antenna (aerial) terminals: 75 ohms, unbalanced

AM tuner section

Tuning range (USA, Canada, and Mexico):

530 kHz – 1,710 kHz (Tuning scale: 10 kHz step)

531 kHz – 1,710 kHz (Tuning scale: 9 kHz step)

Tuning range (Europe and Australia):

531 kHz – 1,602 kHz (Tuning scale: 9 kHz step)

Antenna (aerial): Loop antenna (aerial)

Video section

Inputs/outputs

Video:

1 Vp-p, 75 ohms

COMPONENT VIDEO (for STR-DN1050 only):

Y: 1 Vp-p, 75 ohms

PB: 0.7 Vp-p, 75 ohms

PR: 0.7 Vp-p, 75 ohms

80 MHz HD Pass Through

HDMI Video

Input/Output (HDMI Repeater block)

4096 × 2160p @ 59.94/60 Hz:

2D (*1)

4096 × 2160p @ 50 Hz:

2D (*1)

3840 × 2160p @ 59.94/60 Hz:

2D (*1)

3840 × 2160p @ 50 Hz:

2D (*1)

4096 × 2160p @ 23.98/24 Hz:

2D (*2)

3840 × 2160p @ 29.97/30 Hz:

2D (*2)

3840 × 2160p @ 25 Hz:

2D (*2)

3840 × 2160p @ 23.98/24 Hz:

2D (*2)

1920 × 1080p @ 59.94/60 Hz:

2D

3D: Side-by-Side (Half)

3D: Over-Under (Top-and-Bottom)

1920 × 1080p @ 50 Hz:

2D

3D: Side-by-Side (Half)

3D: Over-Under (Top-and-Bottom)

1920 × 1080p @ 29.97/30 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1920 × 1080p @ 25 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1920 × 1080p @ 23.98/24 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1920 × 1080i @ 59.94/60 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1920 × 1080i @ 50 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1280 × 720p @ 59.94/60 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1280 × 720p @ 50 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1280 × 720p @ 29.97/30 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

1280 × 720p @ 23.98/24 Hz:

2D (*3)

3D: Frame packing

3D: Side-by-Side (Half) (*3)

3D: Over-Under (Top-and-Bottom) (*3)

720 × 480p @ 59.94/60 Hz:

2D (*3)

720 × 576p @ 50 Hz:

2D (*3)

640 × 480p @ 59.94/60 Hz:

2D (*3)

^*1 Supports YUV 4:2:0 / 8 bit format only.

^*2 Supports 8 bit format only.

^*3 These formats are also supported by MHL connection.

MHL section

Supported MHL version: Incorporates MHL 2

Maximum current: 900 mA

iPhone/iPad/iPod section

DC 5V 1.0 A MAX

USB works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, iPhone 3G, iPod touch (2nd through 5th generation), iPod classic, and iPod nano (3rd through 7th generation).

BLUETOOTH technology works with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS, and iPod touch (4th and 5th generation).

AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later.

You can use “SongPal” app with this receiver via BLUETOOTH or network connection.

You can only charge the iPhone/iPod when they are connected to the USB port while the receiver is turned on.

Network section:

Ethernet LAN: 10BASE-T/100BASE-TX

Wireless LAN:

Compatible standards: IEEE 802.11 b/g

Security:

WEP 64 bit, WEP 128 bit, WPA/WPA2-PSK (AES), WPA/WPA2-PSK (TKIP)

Radio frequency:

2.4 GHz

BLUETOOTH section

Communication system: BLUETOOTH Specification version 3.0

Output: BLUETOOTH Specification Power Class 2

Maximum communication range: Line of sight approx. 10 m (33 feet) (*1)

Frequency band: 2.4 GHz band (2.4000 GHz – 2.4835 GHz)

Modulation method: FHSS (Freq Hopping Spread Spectrum)

Compatible BLUETOOTH profiles (*2): A2DP (Advanced Audio Distribution Profile), AVRCP 1.3 (Audio Video Remote Control Profile)

Supported Codecs (*3): SBC (*4), AAC, aptX

Transmission range (A2DP): 20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)

^*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.

^*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.

^*3 Codec: Audio signal compression and conversion format

^*4 Subband Codec

General section

Power requirements

USA and Canadian models: 120 V AC, 60 Hz

Mexican model: 127 V AC, 60 Hz

European model: 230 V AC, 50/60 Hz

Australian model: 230 V AC, 50 Hz

Power consumption

240 W

Power consumption (during standby mode)

STR-DN1050:

0.3 W (When [Control for HDMI], [Pass Through], [Network Standby] (*), and [Bluetooth Standby] are set to [Off], and the receiver in zone 2 is turned off.)

0.7 W (When [Control for HDMI] is set to [On], [Pass Through], [Network Standby] (*), and [Bluetooth Standby] are set to [Off], and the receiver in zone 2 is turned off.)

1.3 W (When [Control for HDMI] and [Bluetooth Standby] are set to [On], [Pass Through] and [Network Standby] (*) are set to [Off], and the receiver in zone 2 is turned off.)

STR-DN850:

0.3 W (When [Control for HDMI], [Pass Through], [Network Standby] (*), and [Bluetooth Standby]are set to [Off].)

0.5 W (When [Control for HDMI] is set to [On], [Pass Through], [Network Standby] (*), and [Bluetooth Standby] are set to [Off].)

1.0 W (When [Control for HDMI] and [Bluetooth Standby] are set to [On], [Pass Through] and [Network Standby] (*) are set to [Off].

^* For USA and Canadian models only

Dimensions (width/height/depth) (Approx.)

STR-DN1050: 430 mm × 172 mm × 329.4 mm (17 in × 6 7/8 in × 13 in)

STR-DN850: 430 mm × 156 mm × 329.4 mm (17 in × 6 1/4 in × 13 in)

including projecting parts and controls

Mass (Approx.)

STR-DN1050: 10.0 kg (22 lb 1 oz)

STR-DN850: 8.0 kg (17 lb 11 oz)

Design and specifications are subject to change without notice.