MULTI CHANNEL AV RECEIVERSTR-DN1050/STR-DN850

Setting the speakers for zone 2 (for STR-DN1050 only)

When the speakers in zone 2 are connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals of the receiver, configure the settings so that the sound selected in zone 2 is output from the speakers connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals.

  1. Select [Settings] - [Speaker Settings] from the home menu.
  2. Select [Speaker Connection].
  3. Set a speaker pattern without surround back and front high speakers.
  4. Select [SB Speaker Assign] - [Zone2].

Note

  • If a speaker pattern with surround back speakers or front high speakers is set, you cannot set the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals for a bi-amplifier connection or a zone 2 connection.
Go to Page Top