1. (on/standby)
   Turns the receiver on or sets it to the standby mode.

   Saving power in standby mode

   Save power by setting the receiver as follows:
   • Set [Control for HDMI], [Pass Through], [Network Standby] (for USA and Canadian models only), and [Bluetooth Standby] to [Off].
   • Turn off the receiver in zone 2 (for STR-DN1050 only).
2. Input buttons
   Select the device you want to use.
   When you press any of the input buttons, the receiver turns on.
3. CUSTOM PRESET
4. A.F.D./2CH, MOVIE, MUSIC
   Select a sound field.
5. AMP MENU
   Displays the menu to operate the receiver.
6. , ///
7. OPTIONS
   Display and select items from the options menus.
8. HOME
   Displays the menu of the audio/video device that is currently being controlled by the remote control.
9. /, (*),
   Skip, play, pause, stop operation.
   PRESET+/–
   Select preset stations or channels.
10. + (*)/-
    Adjust the volume level of all speakers at the same time.
11. HDMI OUTPUT
    Switches the output for two monitors connected to the HDMI OUT A and HDMI OUT B jacks (for STR-DN1050 only).
    Turns the output for HDMI TV OUT on/off (for STR-DN850 only).
12. WATCH, LISTEN Select [Watch] or [Listen] on the home menu directly. When pressing these buttons on the Watch or Listen screen, you can move the focus to select the desired input.
13. DISPLAY
    View information on the display panel.
14. RETURN
    Returns to the previous menu or exits a menu or on-screen guide that is displayed on the TV screen.
15. 
    Turns off the sound temporarily. Press the button again to restore the sound.

^* The and + buttons have tactile dots. Use the tactile dots as a reference when operating the receiver.

Note

• The above explanations are intended to serve as examples.
• Depending on the model of your connected device, some functions explained in this section may not work with the supplied remote control.