MULTI CHANNEL AV RECEIVERSTR-DN1050/STR-DN850

No image appears on the TV.

  • Select the appropriate input using the input buttons.
  • Set your TV to the appropriate input mode.
  • Move your audio device away from the TV.
  • Assign the component video input correctly (for STR-DN1050 only).
  • When you are upconverting input signals using the receiver, use the same type of output signals as input signals (for STR-DN1050 only).
  • Make sure that cables are correctly and securely connected to devices.
  • Some playback devices need to be set up. Refer to the operating instructions supplied with each device.
  • Be sure to use a High Speed HDMI cable when you view images or listen to sound, especially for 1080p, Deep Color (Deep Colour), 4K or 3D transmission.
  • The output of the HDMI video signals of the receiver may be set to [HDMI OFF]. In this case,
    • set to [HDMI ON] (for STR-DN850 only).
    • set to [HDMI A], [HDMI B], or [HDMI A + B] (for STR-DN1050 only).
Go to Page Top