CONDITION [NOT EC]Setting auto on/standbyCONDITION [EC]Setting auto on/networked standby

DELIMITER [NOT EC]
You can place the projector in standby mode at a specified time or when a smartphone is detected.
DELIMITER [NOT EC]
DELIMITER [EC]
You can place the projector in networked standby mode at a specified time or when a smartphone is detected.
DELIMITER [EC]

  1. Start / (CONSTANT [2359]Portable Ultra Short Throw Projector Application) on the smartphone.
  2. Tap the (CONSTANT [2072]Settings) button.
  3. Tap [CONSTANT [2092]Auto on/Networked Standby].
  4. Select the item to be set.

Setting items

[CONSTANT [2106]Switch to Networked Standby after inactivity]

DELIMITER [NOT EC]
When the projector is in poster mode and not operated for more than 20 minutes in a dark room, it enters standby status and the projection screen is dimmed. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [NOT EC]
DELIMITER [EC]
When the projector is in poster mode and not operated for more than 20 minutes in a dark room, it enters networked standby status and the projection screen is dimmed. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [EC]

[CONSTANT [2107]On at a specified time]

DELIMITER [NOT EC]
At the specified time, the projector resumes from standby status and projects the image. When you tap [CONSTANT [2107]On at a specified time], the setting screen appears. Tap the switch to enable the setting, then specify the time. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [NOT EC]
DELIMITER [EC]
At the specified time, the projector resumes from networked standby status and projects the image. When you tap [CONSTANT [2107]On at a specified time], the setting screen appears. Tap the switch to enable the setting, then specify the time. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [EC]

[CONSTANT [2108]Switch to Networked Standby at a specified time]

DELIMITER [NOT EC]
At the specified time, the projector enters standby status and dims the projection screen. When you tap [CONSTANT [2108]Switch to Networked Standby at a specified time], the setting screen appears. Tap the switch to enable the setting, then specify the time. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [NOT EC]
DELIMITER [EC]
At the specified time, the projector enters networked standby status and dims the projection screen. When you tap [CONSTANT [2108]Switch to Networked Standby at a specified time], the setting screen appears. Tap the switch to enable the setting, then specify the time. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [EC]

[CONSTANT [2111]On when smartphone detected]

DELIMITER [NOT EC]
When the projector detects the smartphone, it resumes from standby status and projects the image. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [NOT EC]
DELIMITER [EC]
When the projector detects the smartphone, it resumes from networked standby status and projects the image. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [EC]

[CONSTANT [2112]Switch to Networked Standby when smartphone detected]

DELIMITER [NOT EC]
When the projector detects that the smartphone has moved away, it enters standby status and dims the projection screen. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [NOT EC]
DELIMITER [EC]
When the projector detects that the smartphone has moved away, it enters networked standby status and dims the projection screen. Each time you tap the switch, the setting is switched between enabled/disabled.
DELIMITER [EC]

Hint

  • When the smartphone and projector are connected, the projector’s clock is automatically synchronized with the smartphone’s clock.
  • DELIMITER [NOT EC]
    After placing the projector in standby status by pressing the power button, if the smartphone is taken out of range of the projector and then returned within five minutes, the [CONSTANT [2111]On when smartphone detected] function may not work. In such a case, turn the projector on manually.
    DELIMITER [NOT EC]
    DELIMITER [EC]
    After placing the projector in networked standby status by pressing the power button, if the smartphone is taken out of range of the projector and then returned within five minutes, the [CONSTANT [2111]On when smartphone detected] function may not work. In such a case, turn the projector on manually.
    DELIMITER [EC]
Go to Page Top