The home screen of the special application

The items displayed in the home screen of “CONSTANT [2359]Portable Ultra Short Throw Projector Application” are described.

  1. (CONSTANT [2072]Settings) button

    Displays the setting menu.

  2. DELIMITER [NOT EC]
    (standby/power-on) button
    DELIMITER [NOT EC]
    DELIMITER [EC]
    (networked standby/power-on) button
    DELIMITER [EC]

    DELIMITER [NOT EC]
    Switches between standby and power-on.
    DELIMITER [NOT EC]
    DELIMITER [EC]
    Switches between networked standby and power-on.
    DELIMITER [EC]

  3. Projector remaining battery life
  4. CONSTANT [2411]Poster button

    Places the projector in poster mode.

    Tap this button to project a poster, to use the screen mirroring function to project the smartphone’s screen, or to project photos or movies from a NOT TRANSLATEDDLNA device.

    The projector is automatically placed in poster mode just after it is turned on. Tap this to place it in poster mode manually.

    Tap the button under [CONSTANT [2411]Poster] to change the poster type.

  5. “CONSTANT [2410]HDMI” button

    Places the projector in “NOT TRANSLATEDHDMI” mode.

    Tap this button to project images from the NOT TRANSLATEDHDMI device connected to the Wireless Unit.

  6. (control panel) button

    Opens the control panel. You can change the screen brightness, volume, etc.

  7. CONSTANT [2412]Photo cast button

    Tap this button to project a photo or movie stored in the smartphone using the special application.

About the notification screen on the smartphone

DELIMITER [NOT EC]
When the smartphone and projector are connected, the notification of “CONSTANT [2359]Portable Ultra Short Throw Projector Application” is displayed in the notification screen on the smartphone. In this notification, you can switch the projector between standby and power-on, and adjust the volume.
DELIMITER [NOT EC]
DELIMITER [EC]
When the smartphone and projector are connected, the notification of “CONSTANT [2359]Portable Ultra Short Throw Projector Application” is displayed in the notification screen on the smartphone. In this notification, you can switch the projector between networked standby and power-on, and adjust the volume.
DELIMITER [EC]

Flick down from the top edge of the smartphone’s screen to open the notification screen. With an NOT TRANSLATEDiPhone, tap “NOT TRANSLATEDToday” (a) to see the notification of this application.


NOT TRANSLATEDAndroid smartphone

NOT TRANSLATEDiPhone

  1. DELIMITER [NOT EC]
    Standby/power-on button
    DELIMITER [NOT EC]
    DELIMITER [EC]
    Networked standby/power-on button
    DELIMITER [EC]
  2. Volume adjustment button

Hint

  • When two or more projectors are registered to the special application, the device name currently connected is displayed on the home screen.
  • The notification screen may vary depending on the smartphone.
Go to Page Top