1. Microphone jack
   • When an external microphone is connected, the internal microphone is turned off automatically.
     When the external microphone is a plugin-power type, the power of the microphone is supplied by the camera.
2. Hooks for shoulder strap
   • Attach both ends of the strap onto the camera.

     

3. (Flash sync) terminal
4. REMOTE terminal
   • When connecting the RM-L1AM Remote Commander (sold separately) to the camera, insert the plug of the Remote Commander into the REMOTE terminal, aligning the guide of the plug with the guide of the REMOTE terminal. Make sure that the cord of the Remote Commander faces forward.
5. Speaker
6. DC IN terminal
   • When connecting the AC-PW10AM AC Adaptor (sold separately) to the camera, turn the camera off, then plug the connector of the AC Adaptor to the DC IN terminal on the camera.
7. HDMI micro jack
8. Multi/Micro USB Terminal*
   • Supports Micro USB compatible device.
9. Access lamp
10. (N mark)
    • This mark indicates the touch point for connecting the camera and an NFC-enabled Smartphone.
      For details on the location of the (N mark) on your Smartphone, refer to the operating instructions of the Smartphone.
    • NFC (Near Field Communication) is an international standard of short-range wireless communication technology.
11. Wi-Fi sensor (built-in)
12. Memory card insertion slot
13. Memory card cover
14. Battery insertion slot
15. Battery cover
16. Tripod socket hole
    • Use a tripod with a screw less than 5.5 mm (7/32 inches) long.
      Otherwise, you cannot firmly secure the camera, and damage to the camera may occur.

^*For details on compatible accessories for the Multi/Micro USB Terminal, visit the Sony website, or consult your Sony dealer or local authorized Sony service facility.