IC RecorderICD-BX140

Print

Setting the clock using the menu

While the IC recorder is stopped, you can set the clock using the menu.

  1. Press MENU to enter the menu mode.

    The menu mode window will be displayed.

  2. Press souni_cue_fr or souni_cue_ff to select “SET DATE,” and then press souni_playPLAY/ENTER.

    The clock setting window will be displayed.

  3. Set year, month, day, hour and minute.

    Press souni_cue_fr or souni_cue_ff to set the year (the last two digits of the year), and then press souni_playPLAY/ENTER.

    Repeat this procedure to set month, day, hour, and minute in sequence. You can move the cursor to the year, month, day, hour and minute by pressing souni_cue_fr or souni_cue_ff.

    When you set the minute and press souni_playPLAY/ENTER, the clock reflects the setting.

  4. Press souni_stop(stop) to exit the menu mode.

Note

  • If you do not press within 1 minute of entering the clock setting data, the clock setting mode is canceled and the window will return to the display of the stop mode.
  • The time is displayed either in 12-Hour with “AM” or “PM,” or in 24-Hour, depending on the “HOUR” setting in the menu.
Go to Page Top

Related Topic

Go to Page Top
4-530-204-11(1)
© 2014 Sony Corporation
Notes on use