View on TV
You can view images on a network-enabled TV by transferring them from the product without connecting the product and TV with a cable. For some TVs, you may need to perform operations on the TV. For details, refer to the operating instructions supplied with the TV.
- MENU →
(Wireless) → [View on TV] → desired device to be connected. -
When you want to play back images using slideshow, press
on the center of the control button.
- To display the next/previous image manually, press the right/left button on the control button.
- To change the device to be connected, press the bottom button on the control button, then select [Device list].
Slideshow settings
You can change the slideshow settings by pressing the bottom button on the control button.
Playback Selection:
Selects the group of images to be shown.
Folder View(Still):
Selects from [All] and [All in Folder].
Date View:
Selects from [All] and [All in Date Rng.].
Interval:
Selects from [Short] and [Long].
Effects*:
Select from [On] and [Off].
Playback Image Size:
Select from [HD] and [4K].
*The settings are effective only for BRAVIA TV which is compatible with the functions.
Note
- You can use this function on a TV that supports DLNA renderer.
- You can view images on a Wi-Fi Direct-enabled TV or network-enabled TV (including cable TV).
- If you connect TV and this product and do not use Wi-Fi Direct, you need to register your access point first.
- Displaying the images on the TV may take time.
- Movies cannot be shown on a TV via Wi-Fi. Use an HDMI cable (sold separately).